Sowing time and seedbed modification for yield maximization in groundnut in notrth Konkan

Authors

  • P. P. NALAWADE College of Agriculture, Dapoli, Ratnagiri-415712, Maharashtra
  • B. P. PATILE College of Agriculture, Dapoli, Ratnagiri-415712, Maharashtra

DOI:

https://doi.org/10.54386/jam.v2i2.434

Keywords:

Time of sowing, Polymulching, Heat units, Broad bed furrow, Flat bed

Downloads

Published

01-12-2000

How to Cite

P. P. NALAWADE, & B. P. PATILE. (2000). Sowing time and seedbed modification for yield maximization in groundnut in notrth Konkan. Journal of Agrometeorology, 2(2), 152–157. https://doi.org/10.54386/jam.v2i2.434

Issue

Vol. 2 No. 2 (2000): December

Section

Research Paper

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

This is a human-readable summary of (and not a substitute for) the license. Disclaimer.

You are free to:

Share — copy and redistribute the material in any medium or format

Adapt — remix, transform, and build upon the material

The licensor cannot revoke these freedoms as long as you follow the license terms.

    Under the following terms:

    Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

    NonCommercial — You may not use the material for commercial purposes.

    ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

    No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

    Notices:

    You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

    No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.