Sensitivity analysis of AquaCrop model for input parameters in simulating growth and yield of pearl millet (Pennisetum Glaucum L.) in semi-arid region of Nigeria

Authors

  • NURENI I. LAWAL Faculty of Agriculture, Borno State University, Maiduguri, Borno State, Nigeria
  • MUHAMMAD M. HARUNA Department of Agricultural and Environmental Resources Engineering, Faculty of Engineering, University of Maiduguri, Maiduguri, Borno State, Nigeria https://orcid.org/0000-0003-2270-8029
  • JIBRIN M. DIBAL Department of Agricultural and Environmental Resources Engineering, Faculty of Engineering, University of Maiduguri, Maiduguri, Borno State, Nigeria
  • ABDU, D. Department of Agricultural and Environmental Resources Engineering, Faculty of Engineering, University of Maiduguri, Maiduguri, Borno State, Nigeria
  • ADAMU Y. ARKU Department of Agricultural and Environmental Resources Engineering, Faculty of Engineering, University of Maiduguri, Maiduguri, Borno State, Nigeria
  • YUSUF A. UMAR Department of Agricultural and Environmental Resources Engineering, Faculty of Engineering, University of Maiduguri, Maiduguri, Borno State, Nigeria

DOI:

https://doi.org/10.54386/jam.v27i3.3060

Keywords:

AquaCrop Model, Lake Chad, Pearl millet, Sensitivity Analysis, Water Stress

Abstract

The need for a localized crop model that will aid in evaluating various strategies for efficient water management, especially in the semi-arid Lake Chad region does not need to be overemphasized. Therefore, as a step to simplify the calibration of the AquaCrop model, this study assessed the sensitivity of the model’s output variables to pearl millet crop input parameters under water stress conditions of Maiduguri, Northeastern Nigeria. The analysis was carried out using the Local Sensitivity Analysis (LSA) technique under a 50 % deficit irrigation scenario. The result revealed that the effects of the input parameters on canopy cover (CC) and biomass yield (BMY) simulations were time-dependent. Overall, a significant number of the model’s inputs were found to be non-influential; these parameters could be set within their predetermined range in order to simplify the model. Whereas, the influential parameters should be given higher consideration during calibration, data collection, and future model development. The results of this study could also be validated using more advanced methods like the Global Sensitivity Analysis (GSA) technique, on different crop varieties that have longer phenological stages and under severe water and fertility stresses.

References

Balvanshi, A., and Tiwari, H. L. (2019). Mitigating future climate change effects on wheat and soybean yields in central region of Madhya Pradesh by shifting sowing dates. J. Agrometeorol., 21(4): 468–473. https://doi.org/https://doi.org/10.54386/jam.v21i4.282

Bello, Z. A., and Walker, S. (2016). Calibration and validation of AquaCrop for pearl millet (Pennisetum glaucum). Crop Pasture Sci., 67(9): 948–960. https://doi.org/10.1071/CP15226

de Souza, J. L. M., de Oliveira, C. T., Rosa, S. L. K., and Tsukahara, R. Y. (2022). Sensitivity analysis of AquaCrop model for maize crop in a humid subtropical climate in Brazil. Agric. Eng. Int.: CIGR J., 24(3): 12–22.

Guo, D. X., Chen, C. F., Guo, P. Y., Yuan, X. Y., Xing, X. G., and Ma, X. Y. (2018). Evaluation of AquaCrop model for foxtail millet (Setaria italica) growth and water use with plastic film mulching and no mulching under different weather conditions. Water (Switzerland), 10(7): https://doi.org/10.3390/w10070836

Haruna, M. M., Ismail, H., Bashir, A. U., and Dbal, J. M. (2023). Local sensitivity analysis of the AquaCrop model outputs for wheatunder Semi-Arid water stress condition. Alger. J. Eng. Technol., 08: 22–30.

Hassan, Z. M., Sebola, N. A., and Mabelebele, M. (2021). The nutritional use of millet grain for food and feed: a review. Agric. Food Secur., 10(1): 16. https://doi.org/10.1186/s40066-020-00282-6

Hsiao, T. C., and Xu, L. K. (2000). Sensitivity of with of roots versus leaves to water stress: Biophysical analysis and relation to water. J. Exp. Bot., 51(350): 1595–1616. https://doi.org/10.1093/jexbot/51.350.1595

Lu, Y., Chibarabada, T. P., McCabe, M. F., De Lannoy, G. J. M., and Sheffield, J. (2021). Global sensitivity analysis of crop yield and transpiration from the FAO-AquaCrop model for dryland environments. Field Crops Res., 269. https://doi.org/10.1016/j.fcr.2021.108182

Rosa, S. L. K., de Souza, J. L. M., Tsukahara, R. Y., and Kochinski, E. G. (2023). Sensitivity analysis of the AquaCrop model for wheat crop in Campos Gerais region, Paraná. Rev. Ceres, 70(1): 32–41. https://doi.org/10.1590/0034-737X202370010004

Sankar, T., Ramanathan, S. P., Kokilavani, S., Chandrakumar, K., and Kalarani, M. K. (2023). Assessment of AquaCrop model for simulating Baby corn (Zea mays L.) growth and productivity under different sowing windows and crop geometries. J. Agrometeorol., 25(2): 280–286. https://doi.org/https://doi.org/10.54386/jam.v25i2.2119

Sattar, A., Nanda, G., Singh, G., Jha, R. K., and Bal, S. K. (2023). Responses of phenology, yield attributes, and yield of wheat varieties under different sowing times in Indo-Gangetic Plains. Front. Plant Sci., 14(July): 1–17. https://doi.org/10.3389/fpls.2023.1224334

Seghatoleslami, M. J., Kafi, M., and Majidi, E. (2008). Effect of drought stress at different growth stages on yield and water use efficiency of five proso millet (Panicum miliaceum l.) genotypes. Pak. J. Bot., 40 (4 SPEC. ISS.): 1427–1432. https://www.mendeley.com/catalogue/6b6f5e7e-73a4-3a84-9875-cf7384a89d29/?utm_source=desktop

Tekalign, T. (1991). Soil, Plant, Water, Fertilizer, Animal Manure and Compost Analysis (13). International Livestock Research Center for Africa, Addis Ababa.

Vanuytrecht, E., Raes, D., and Willems, P. (2014). Global sensitivity analysis of yield output from the water productivity model. Environ. Model. Softw., 51: 323–332. https://doi.org/10.1016/j.envsoft.2013.10.017

Downloads

Published

01-09-2025

How to Cite

LAWAL, N. I., HARUNA, M. M., DIBAL, J. M., ABDU, D., ARKU, A. Y., & UMAR, Y. A. (2025). Sensitivity analysis of AquaCrop model for input parameters in simulating growth and yield of pearl millet (Pennisetum Glaucum L.) in semi-arid region of Nigeria. Journal of Agrometeorology, 27(3), 292–298. https://doi.org/10.54386/jam.v27i3.3060

Issue

Vol. 27 No. 3 (2025): September

Section

Research Paper

Categories

License

Copyright (c) 2025 NUREINI I. LAWAL, MUHAMMAD M. HARUNA, JIBRIN M. DIBAL, ABDU, D., ADAMU Y. ARKU, YUSUF A. UMAR

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

This is a human-readable summary of (and not a substitute for) the license. Disclaimer.

You are free to:

Share — copy and redistribute the material in any medium or format

Adapt — remix, transform, and build upon the material

The licensor cannot revoke these freedoms as long as you follow the license terms.

    Under the following terms:

    Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

    NonCommercial — You may not use the material for commercial purposes.

    ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

    No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

    Notices:

    You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

    No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.