Green gram yield projections for Kibwezi east subcounty Kenya using the APSIM model under RCP's 4.5 and 8.5

Authors

  • ZIPPORAH MALUVU Department of Earth and Climate Sciences, University of Nairobi, P.O Box 30197- 00100, Nairobi, Kenya
  • CHRISTOPHER OLUDHE Department of Earth and Climate Sciences, University of Nairobi, P.O Box 30197- 00100, Nairobi, Kenya
  • DANIEL KISANGAU Department of Biological Sciences, Egerton University, P.O Box 536-20115, Njoro, Kenya
  • JACINTA M. MAWEU Department of Philosopy, University of Nairobi, P.O Box 30197-00100, Nairobi, Kenya.

DOI:

https://doi.org/10.54386/jam.v27i1.2722

Keywords:

Green gram, Climate change, APSIM, Kibwezi East Subcounty

Abstract

Green gram is widely grown in Kenya for food and income. However, climate change has shown unprecedented effects on its production in Kibwezi East Sub County affecting its yielding capacity. In this study, the Agricultural Production Systems Simulator Model (APSIM) (green gram module) was used to evaluate climate change impacts on its production by simulating the yields under present scenario (2001-2023), Representative Concentration Pathways 4.5 and 8.5 (2041-2071) climate scenarios. The model was parameterized and evaluated using soil data, daily climate data and phenological characteristics for three green gram varieties, Biashara, KS 20 and N26. Yield data was obtained from a field experiment carried out during the October - November – December (OND) planting seasons in 2020 and 2021.The developed models had a Coefficient of Determination (R2) ranging from 0.58 to 0.84 and a Root Mean Square Error (RMSE) ranging 3.0 and 13.3 meaning the models were reliable in simulating future yields. Model predictions showed that performance of green gram under RCP 4.5 and RCP 8.5 would greatly reduce. Varieties KS 20 and Biashara showed relatively high resilience to increased temperatures. This calls for employment of innovative and sustainable strategies for climate change adaptation.

References

Ahmed, F., Talukder, A. H. M. M. R., Mosaddek Ahmed, I., Hossain, M. S., Chaki, A. K., Zahan, T., Istiaque, S., Akhter, S., Biswas, J. C., and Rahman, M. M. (2023). Optimizing sowing window for mungbean and its adaptation option for the South-central zone of Bangladesh in future climate change scenario using APSIM model. PLOS Climate, 2(7): e0000180. https://doi.org/10.1371/journal.pclm.0000180

Anonymous, (2013). Makueni County First County Integrated Development Plan 2013-2017. Government of Kenya, Nairobi.

Anonymous, (2020). National Treasury and Planning. Can Green Grams Enhance Food and Nutrition Security in Kenya? Evidence from top eight Green Grams Producing Counties in Kenya. State department of Planning. Kenya Vision 2030.

Asseng, S., Zhu, Y., Basso, B., Wilson, T., D. and Cammarano, D. (2014). Simulation Modelling: Applications in Cropping Systems, Editor(s): Neal K. Van Alfen, Encyclopedia of Agriculture and Food Systems, Academic Press, 2014, Pages 102-112, ISBN 9780080931395, https://doi.org/10.1016/B978-0-444-52512-3.00233-3.

Chai, T., and Draxler, R.R. (2014). Root mean square error (RMSE) or mean absolute error (MAE)? – Arguments against avoiding RMSE in the literature. Geosci. Model Develop., 7: 1247-1250.

Chauhan, Y.S., Douglas, C., Agius, P., Martin, W.J., Kristopher, and Skerman, A. (2010). Physiology of Mungbean and Development of the Mungbean Crop Model. Proceedings of the 1st Australian Summer Grains Conference. Gold Coast, Australia QL,1-11.

Chen, S., Ghadami, A, and Epureanu, B.I. (2022). Practical guide to using Kendall’s τ in the context of forecasting critical transitions. R. Soc. Open Sci. 9: 211346. https://doi.org/10.1098/rsos.211346

Dahiya, G., Bhardwaj, K.K.,Ahlawat,I., and Verma, Sonia. (2020). Role of experimental designs in agricultural research. 10.13140/RG.2.2.31101.59367

Kaur, R., Bains, T.S., Bindumadhava, H., and Nayyar, H. (2015). Responses of mungbean (Vigna radiata L.) genotypes to heat stress Effects on reproductive biology, leaf function and yield traits. Sci. Hort., 197: 527-541

Mohanty, M., Nishant K., Sinha, K.M,. Hati, K., Sammi R., and Chaudhary, R.S. (2015). Elevated temperature and carbon dioxide concentration effects on wheat productivity in Madhya Pradesh: a simulation study. J. Agrometeorol., 17(2): 185–189. https://doi.org/10.54386/jam.v17i2.1001

Mohanty, M., Probert, M. E., Reddy, K. S., Dalal, R. C., Mishra, A. K., Subba Rao, A., Singh, M., and Menzies, N. W. (2012). Simulating soybean-wheat cropping system: APSIM model parameterization and validation. Agric. Ecosys. Environ., 152(May): 68–78. https://doi.org/10.1016/j.agee.2012.02.013

Muchomba, M. K., Muindi, E. M., and Mulinge, J. M. (2023). Overview of Green Gram (Vigna radiata L.) Crop, Its Economic Importance, Ecological Requirements and Production Constraints in Kenya. J. Agric. Ecol. Res. Intern., 24 (2):1–11

Mugo, J. W., Opijah, F. J., Ngaina, J., Karanja, F., and Mburu, M. (2023). Simulated effects of climate change on green gram production in Kitui County, Kenya. Front. Sustain. Food Syst., 7(June): 1–15. https://doi.org/10.3389/fsufs.2023.1144663

Mugo, J. W., Opijah, F. J., Ngaina, J., Karanja, F., and Mburu, M. (2020). Suitability of Green Gram Production in Kenya under Present and Future Climate Scenarios Using Bias-Corrected Cordex RCA4 Models. Agric. Sci., 11(10): 882–896. https://doi.org/10.4236/as.2020.1110057

Mulwa, G. K., Kitonyo, O. M., and Nderitu, J. H. (2023). Earliness and Crop Morphological Traits Modulate Field Pest Infestation in Green Gram. J. Econ. Entomol., 116(2): 462–471. https://doi.org/10.1093/jee/toac205

Nishant, K. S., Mohanty, M., Somasundaram, J., Chaudhary, R.S., Patra, H., Hati, K.M., Rana, P. S., Jyoti, K. T., Jitendra, K., Dhiraj, K., Alka, R., Singh, A.B., Bal, K.S., Sammi Reddy, K., and Prabhakar, M. (2021). Maize productivity analysis in response to climate change under different nitrogen management strategies. J. Agrometeorol., 23(3): 279–285. https://doi.org/10.54386/jam.v23i3.54

Yamusa, A.M., and Akinseye, F.M. (2018). Evaluation of APSIM – Maize model under different sowing dates at Samaru, Nigeria. J. Agrometeorol., 20(3): 206–210. https://doi.org/10.54386/jam.v20i3.545

Downloads

Published

01-03-2025

How to Cite

MALUVU, Z., OLUDHE, C., DANIEL KISANGAU, & JACINTA M. MAWEU. (2025). Green gram yield projections for Kibwezi east subcounty Kenya using the APSIM model under RCP’s 4.5 and 8.5 . Journal of Agrometeorology, 27(1), 33–37. https://doi.org/10.54386/jam.v27i1.2722

Issue

Vol. 27 No. 1 (2025): March

Section

Research Paper

Categories

License

Copyright (c) 2024 ZIPPORAH MALUVU, CHRISTOPHER OLUDHE, DANIEL KISANGAU, JACINTA M. MAWEU

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

This is a human-readable summary of (and not a substitute for) the license. Disclaimer.

You are free to:

Share — copy and redistribute the material in any medium or format

Adapt — remix, transform, and build upon the material

The licensor cannot revoke these freedoms as long as you follow the license terms.

    Under the following terms:

    Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

    NonCommercial — You may not use the material for commercial purposes.

    ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

    No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

    Notices:

    You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

    No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.